Varivip Serie
Pressure equipment VARIVIP 2 – 1H
VARIVIP2 1H series single-phase pressure equipment is designed to transfer clean water without additives that could damage the materials of the equipment.
They consist of a horizontal VIP HT pump and a compact VARIACHE 2 frequency inverter, which guarantees the operating pressure by varying the motor speed to adapt it to the water demand.
- Constant pressure, despite possible flow fluctuations in the installation
- Reduction of the group’s space, since large accumulators are not necessary
- Silent pressure equipment
- Joint design of all equipment, ready for automatic operation
- Modular construction configurable according to the required equipment
- Reduces energy consumption by up to 40%.
- Soft start and soft stops, eliminating water hammer
- The appropriate VARIVIP2 1H unit is defined in the selection table, depending on the flow rate and the required head.
- The power range is from 0,6 to 1,5 Kw, flow rate 0,9 to 9 m3/h and height 24,7 to 39 m.c.a.
- Maximum liquid temperature 50ºC
- Dry run alarm
- For the supply of houses, commercial premises, industries, or any type of installation that requires a constant water pressure, a silent installation, and a considerable energy saving.
- Communities of neighbors
- Toilet rooms in shops, markets and shopping centres.
- Water distribution from a tank
- Water supply to networks without sufficient pressure
- Small hydraulic applications
- Factories
- Laboratories
Depending on the needs of the installation itself contemplated in the project, it is possible to distinguish the different configurations formed by:
* VIP Pump H Three-phase. With threaded suction and discharge flanges, radial type steel impellers (AISI 304), graphite/ceramic mechanical seal, suction and discharge body in GG-25, diffusers in glass fibre reinforced noryl, in monobloc configuration and stainless steel shaft motor.
* 5-way connector. The 5-way fitting is the backbone of the pressure equipment installation, it is the element that joins all the elements, allowing a correct operation all at the same time, it has 5 ways to be able to install in each one of them a different device.
* Calderín 24 liters. Vertical made of welded galvanized steel, built according to the European directive 97/23/CE of pressure equipment, made according to homologated procedures, able to resist the working pressure loosely.
*VARIACHE 2 Frequency Controller: Compact frequency converter for controlling pumping equipment at constant pressure.
It replaces traditional control systems based on pressure switches in both new and existing installations.
Guarantees service pressure by adapting to water demand by varying motor speed, thus reducing energy consumption by 40%Quiet operation, soft starts and stops eliminating water hammer.
Maximum working pressure 10 bar. Set pressure adjustable between 1 and 6 bar, shown on the display
Equipped with dry pump running alarm, and pressure transducer.
Connected to the mains by means of an incorporated single-phase plug.
